Philips AZ150517 - Manual (Page 9)

DIGITAL TUNER CD PLAYER
Autostore
Autostore automatically starts programming radio
stations from preset 1. Available stations are
programmed in order of waveband reception strength;
FM, followed by AM. Any previous presets e.g.
manually programmed will be erased.
• Press PROGRAM for 4 seconds or more to activate
autostore programming.
The display shows RUk 0. PROG blinks,
followed by the radio station details when
stored.
After all stations are stored, the first preset station
will then automatically play.
To listen to a preset station
• Direct Easy Access: use the digit panel on the set
to key in a number, 1-40, to select a preset station.
• Remote control (AZ1505 models only}; optionally,
press PRESET +to select your preset station.
CD PLAYER
Playing a CD
This CD player plays Audio Discs including CD-
Recordables and CD-Rewritables.
1. Adjust the POWER slider to CD.
2. Insert a CD with the printed side facing up and
close the door.
rioTi/ if no CD inserted/ CD dirty, incorrectly
inserted or damaged.
-* n F C d if you have inserted a non-finalized CD-
R(W).
3. Press ►II to start playback.
d R t R if your CD contains non-audio i.e. data
files,
4. To pause playback press ►II. Press Hi again to
resume play.
Display: ► flashes during pause.
5. To stop CD playback, press the ■ button.
Note: CD play will also stop when:
- the CD-tape door is opened
- the CD has reached the end
- you select TAPE or RADIO function.
Selecting a different track
There are 2 ways:
Direct Easy Access
• Key in the number of the track using the digit panel
on the set.
SEARCH M4 or
• Press SEARCH or ►« once or repeatedly to
select your track.
Finding a passage within a track
f. Press and hold SEARCH or m
- The CD is played at high speed and low volume.
2. When you recognize the passage you want,
release hm or wh to resume normal playback.
Note: During a CD program or if SHUFFLE/REPEAT
active, searching is only possible within a track.
Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes
before or during playback, and combine the modes
with PROGRAM. (See [|]}
SHUFFLE - tracks of the entire CD/ program are
played in random order
SHUFFLE REPEAT ALL - to repeat the entire CD/
program continuously in random order
REPEAT ALL - repeats the entire CD/ program
REPEAT - plays the current track continuously
1. To select play mode, press MODE once or more.
2. Press ►!! to start playback if in the stop position.
3. To select normal playback, press MODE repeated­
ly until the various modes are no longer displayed.
- You can also press the ■ button to cancel your
play mode.
Programming track numbers
In the stop position, select and store your CD tracks in
the desired sequence. Up to 20 tracks can be stored in
the memory.
f. Press SEARCH or on the set to select your
desired track number.
Z Press PROGRAM
- Display: PROG, Pr and your selected track
number. (See [g)
-* If you attempt to program without first
selecting a track number, o o S f is shown.