Safety & maintenance information, Co player and cd handling, Tape deck maintenance – Philips AZ150517 User Manual

Page 11: Cassette recorder safety and maintenance, Environmental information

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CASSETTE RECORDER

SAFETY AND MAINTENANCE

SAFETY & MAINTENANCE INFORMATION

(See [Ui

• Don't expose the set, batteries, CDs or cassettes to

humidity, rain, sand or excessive heat.

• Clean the set with a dry cloth. Don’t use any

cleaning agents containing alcohol, ammonia,

benzene or abrasives as these may harm the set.

• Place the set on a hard and flat surface so that the

system does not tilt. Make sure there is good

ventilation to prevent the set overheating.

• The mechanical parts of the set contain

self-lubricating bearings and must not be oiled or

lubricated.

CO player and CD handling

• If the CD player cannot read CDs correctly, use a

cleaning CD to clean the lens before taking the set

to repair,

• The lens of the CD player should never be touched!

• Sudden changes in the surrounding temperature

can cause condensation on the lens of your CD

player. Playing a CD is then not possible. Do not

attempt to clean the lens but leave the set in a

warm environment until the moisture evaporates.

• Always close the CD-tape door to avoid dust on the

lens.

* To clean the CD, wipe in a straight line from the

center towards the edge using a soft, lint-free

cloth. Do not use cleaning agents as they may

damage the disc.

• Never write on a CD or attach any stickers to it.

Tape deck maintenance

To ensure quality recording and playback of the tape

deck, clean parts as shown, once a

month. Use a cotton bud slightly moistened with

alcohol or a special head cleaning fluid to clean the

deck.

/. Open the CD-tape door.

Press PAUSE ll and clean the heads and the

capstan (g).

After cleaning, press STOP ■.

Environmental information

We have done our best to reduce the packaging and make it easy to separate into 3 materials:
cardboard, expandable polystyrene, polyethylene.

Your set consists of materials which can be recycled if disassembled by a
specialized company. Please observe the local regulations regarding the disposal of
packaging, dead batteries and old equipment.