SoundMax SM-CMD3007 User Manual
Page 15

15
return to current mode.
Note: If turn off the power, all the settings of each mode will be saved. If turn off the ACC power, all the
settings will be clear and become factory default setting. If you don’t adjust setting within 3 seconds after
selecting the desired setting item, the unit will automatically return to the current mode.
System setup
Press MENU button on the panel or RC to enter Setting Menu. Press UP/DOWN cursor buttons on the RC or
VOLUME+/- buttons on the panel to select a menu page. Press ENTER button or RIGHT cursor button on the
RC or press OK button on the panel to enter the page. Press LEFT/RIGHT cursor buttons on the RC or
VOLUME+/VOLUME- buttons on the panel to select an item, then press OK button on the RC or SEL button
on the panel to adjust the setting.
Press ENTER button or RIGHT button on the RC or OK button on the panel to confirm, press MENU button to
return to last settings list.
AUDIO MENU
Bass: Support 10 levels. Default level is 0.
Treble: Support 10 levels. Default level is 0.
Balance: Support 10 levels for each left and right channel. Default is left equal to right.
Fader: Support 10 levels for each front and rear channel. Default is front equal to rear.
EQ DSP: FLAT => CLASSICS => POP => ROCK => DSP OFF.
PICTURE MENU (available in DVD/USB/Card modes only)
Red: Adjust level of red color. Support 50 levels. Default level is 25.
Green: Adjust level of green color. Support 50 levels. Default level is 25.
Blue: Adjust level of blue color. Support 50 levels. Default level is 25.
Brightness: Adjust level of screen brightness. Support 50 levels. Default level is 25.
Contrast: Adjust level of screen contrast. Support 50 levels. Default level is 25.