Philips HP6512-50 - Manual (Page 7)

Cleaning
IMPORTANT
► Always switch the Epilator to OFF position
“O” and remove plug from electrical outlet and
epilator before cleaning.
I Never immerse this appliance in water.
I Do not use strong or abrasive cleaners or
acetone to clean the housing/body of Epilator.
Cleaning the Epilator Head
I It is essential for hygienic reasons and
optimum performance that the epilating head,
attachments and rotating discs are cleaned
after each use.
I Never clean, remove, or replace epilating head,
attachments or rotating discs while motor is
ON.The rotating discs are not removable from
the appliance.
> Do not apply pressure or touch rotating discs
with hard objects as this may dent or damage
the discs. If damage occurs, discontinue use
immediately.
n Remove the epilating head by pushing the
head in the direction of the arrows indicated
on the back of the epilating head (1). Lift
the epilating head off the appliance (2)
(Fig. 6).
B Remove loose hairs from the epilating discs
with the brush (Fig. 7).
Never try to detach the epilating discs from the
appliance.
B Rinse the epilating head thoroughly under
warm tap water (Fig. 8).
Q Shake off excess water (Fig. 9) and dry
epilating head completely with a soft towel.
Do not replace the epilator head onto the appli­
ance until it is completely dry.
B Place the epilating head back onto the
appliance (1) and push it against the direction
of the arrows indicated on the back of the
epilating head (2) until it snaps back into
position (Fig. 10).You will hear a click.
The epilating head only fits onto the appliance in
one way.
This Epilator has no other user-serviceable parts.
For assistance, call 1-800-243-7884.
Cleaning the Hait^lifting Attachment
D Remove the hair lift and massage element
from the epilating head (Fig. 11).
B
Remove loose hairs from the attachment
with the brush.
B Rinse the attachment thoroughly under
warm tap water.
Q Shake off excess water and dry the
attachment completely with a soft towel.
Do not replace the attachment and the epilator
head until these parts are completely dry.