License plate lamp, Replacement bulbs, License plate lamp -39 replacement bulbs -39 – Cadillac 2011 Escalade EXT User Manual
Page 401: Vehicle care 10-39

Black plate (39,1)
Cadillac Escalade EXT Owner Manual - 2011
Vehicle Care
10-39
4. Turn the bulb socket
counterclockwise to remove it
from the taillamp assembly.
5. Pull the bulb straight out from
the socket.
6. Press a new bulb into the bulb
socket.
7. Reinstall the socket into the
taillamp assembly by turning the
bulb socket clockwise until it
clicks.
8. Reinstall the taillamp assembly
making sure to line up the pins
with the vehicle and tighten the
screws.
License Plate Lamp
To replace one of these bulbs:
1. Reach under the rear bumper for
the bulb socket.
2. Turn the bulb socket
counterclockwise and pull the
bulb socket out of the lamp
assembly.
3. Pull the bulb straight out of the
socket.
4. Install the new bulb.
5. Reverse Steps 1 and 2 to
reinstall the bulb socket.
Replacement Bulbs
Exterior Lamp
Bulb
Number
Back-up Lamp
7441
License
Plate Lamp
168LL
(W5WLL)
Stoplamp/Taillamp/
Turn Signal Lamp
7443
For replacement bulbs not listed
here, contact your dealer.