Cypress CY8C24x23A - Manual (Page 17)

Page 17 of 28 5.4-011808
P/N Description Photo
CY3240-
I2USB
I
2
C – USB Bridge Kit (Rev A)
The I2C-USB Bridge Kit allows one to test, tune and debug hardware and software of a
PSoC application by bridging the USB port to I
2 C. Populated with the CY8C24894 PSoC
device. A wide variety of devices can be connected to the PC using this bridge. Among
them are: EEPROMs, real-time clocks, ADC/DAC converters, LCD displays, regulated
DC/DC converters, port expanders and many other devices incorporating the I2C
interface. The number of devices that can be connected is constrained only by the I2C
address limit and physical ability of the I2C bus. The above photo is a larger view of the
board shown to the right.
• I2C-USB
Bridge
•
I2C Slave Demonstration Board
•
USB Mini B Cable (6 feet)
•
Supporting Software CD
[+] Feedback