Clarion CS105 User Manual

Page 5

Multi-Car Operation

If you want to control multiple systems by a single Remote Transmitter, an optional 3-Button
Remote Transmitter is available. The 3-Button Remote Transmitter gives you the convenience
of operating several vehicles from a single Remote Transmitter.

For more information about Multi-Car operation, see your Dealer.

Adding a New Transmitter into the System

The system has the ability to recognize up to 20 individual remote transmitters. If the vehicle is
used by multiple drivers, each can have their own Remote Transmitter.

To add a Remote Transmitter:

1. Turn on the ignition.
2. Press and hold the Override switch.

• The status LED will turn on red.

3. Within 5 seconds:

Continue holding the Override switch and Press Transmitter Button 1 for remote

locking

with chirp confirmation.

--- or ---

Release the Override switch and Press Transmitter Button 1 for remote locking

without chirp confirmation.

• The status LED will flash once quickly to confirm that the new Remote Transmitter

has been added.

4. Turn off the ignition.

Deleting Transmitters (Adding a Remote Transmitter

and Erasing All

Other Remote Transmitters From the System)