Industry standards, Indicator and port specifications – Cisco 4948 User Manual
Page 8

© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 8 of 14
•
BGP4-MIB
•
CISCO-BULK-FILE-MIB
•
CISCO-CLASS-BASED-QOS-MIB
•
CISCO-FTP-CLIENT-MIB
•
CISCO-HSRP-MIB
•
CISCO-IGMP-FILTER-MIB
•
CISCO-IPMROUTE-MIB
•
CISCO-PORT-SECURITY-MIB
•
CISCO-RMON-CONFIG-MIB
•
CISCO-VTP-MIB
•
ETHERLIKE-MIB
•
EXPRESSION-MIB
•
CISCO-PORT-STORM-CONTROL-MIB
•
IS-IS MIB
•
RIP SNMP MIB
Industry Standards
•
Ethernet—IEEE 802.3 and 10BASE-T
•
Fast Ethernet—IEEE 802.3u, 100BASE-TX, and 100BASE-FX
•
Gigabit Ethernet—IEEE 802.3z and 802.3ab
•
IEEE 802.1D Spanning Tree Protocol
•
IEEE 802.1w rapid reconfiguration of spanning tree
•
IEEE 802.1s multiple VLAN instances of spanning tree
•
IEEE 802.3ad LACP
•
IEEE 802.1p class-of-service (CoS) prioritization
•
IEEE 802.1Q VLAN
•
IEEE 802.1x user authentication
•
X2 support
•
RMON I and II standards
Indicator and Port Specifications
•
System status—Green (operational); red (faulty)
•
Console—RJ-45 female
•
Reset (switch recessed protected)
•
Uplinks—Link and active
•
Image management port—10/100BASE-TX (RJ-45 female) data terminal equipment (DTE); green (good); orange (disabled); off (not connected)