CyberResearch GDO 18 - Manual (Page 7)

User’s Manual
v
Important Safety Instructions
Please read the following instructions carefully. This manual should be retained
for future use.
1. To clean the LCD monitor screen, first, make sure the monitor is in
the Power Off mode. Unplug the monitor from its power source before
cleaning it. Do not spray liquid cleaners directly onto the unit. Stand away
from the LCD monitor and spray cleaning solution onto a rag. Without
applying excessive pressure, clean the screen with the slightly dampened rag.
2. Do not place your LCD monitor near a window. Exposing the monitor
to rain, water, moisture or sunlight can severely damage it.
3. Do not place anything on top of the monitor-to-PC signal cord. Make sure
that the cord is placed in an area where it will not be stepped on.
4. Do not apply pressure to the LCD screen. Excessive pressure may
cause permanent damage to the display.
5. Do not remove the cover or attempt to service this unit by yourself. You may
void the warranty. Servicing of any nature should be performed only by
an authorized technician.
6. Safe storage of the LCD monitor is in a range of minus 20 to plus
65 degrees Celsius (68°F - 149°F). Storing your LCD monitor outside of this
range could result in permanent damage.
7. If any of the following occurs, immediately unplug your monitor and call
CyberResearch.
• The power or monitor-to-PC signal cord is frayed or damaged.
• Liquid has been spilled onto the monitor, or it has been exposed to rain.