Connecting the stereo speakers, User’s manual 8 – CyberResearch GDO 18 User Manual
Page 18
User’s Manual
8
Figure 1-5: Connecting the LCD Monitor to the PC
3.
If your PC has a graphic card with a 24-pin DVI connector, you should
connect it with the digital 24-pin DVI signal cable.
4.
Make sure the signal cable head is securely connected to the VGA port
of your PC. Tighten the connecting screws to ensure a s ecure connection.
5.
Turn on your computer and LCD monitor.
If both analog (15-pin D-sub VGA) and digital (24-pin DVI) input ports
are connected at the same time, the signal input can be selected with
the OSD (On-Screen Display) menu. Please go to the next chapter for
details.
Connecting the Stereo Speakers
Please refer to the following instructions for connecting the LCD monitor’s stereo
speakers.
1.
Connect the 1.5M sound cable to the Line out of your PC’s audio card.