ClearSounds V808 - Manual (Page 17)

16 – ENGLISH 17 – ENGLISH
Audio Tone Neckloop Action
Single High Tone Pairing Successful
Ring Tone Incoming Call
Single High Tone End Call
5 Rapid High tones repeated every
20 seconds
Battery Low
No Audio Indication (deteriorating
audio quality)
Out of Range
Singe Low Tone (depends on phone) Initiate Voice Activation
Dual HI/LOW tone if supported by
the phone.
Voice tag not recognized
5 Rapid tones repeated every 60
seconds after the phone goes out
of network service for more than 20
seconds.
No Network/Services
(handsfree profile)
USING YOUR CLA7BT AS A
PERSONAL AUdIO NECkLOOP
Your ClearSounds CLA7BT can also be used as
an amplified Audio Neckloop with any audio or
other device that supports standard Bluetooth
connections. Follow the same pairing methods
as was done when pairing with a cell phone
and follow the pairing instructions for your
audio device. Your cell phone or audio device
may need to have a connection to the CLA7BT
activated when switching between devices or
there can be an automatic connection, check
with your various Bluetooth devices for their
method of operation. Guide
CLA7BT-EN,SP,FR.indd 17 9/9/08 10:45:02 AM