ClearSounds V808 - Manual (Page 11)

10 – ENGLISH 11 – ENGLISH
securely clicked in place. There will be two
distinct clicks.
2. Make sure your CLA7BT is paired to the
device you wish to use
3. Switch your hearing aid to “T” or “MT”
mode when ready to make or receive a call.
TURNING YOUR CLA7BT
ON ANd OFF
To turn the CLA7BT ON
Press the Multi-Function button on the side of
the CLA7BT. A series of 4 tones (low to high)
can be heard from your hearing aid when it is
in t-coil mode and the LED flashes 2 times (0.1
seconds)
To turn the CLA7BT OFF
Press the Multi-Function button on the side of
the CLA7BT. A series of 4 tones (high to low)
can be heard from your hearing aid when it is
in t-coil mode and the LED flashes 2 times (0.5
seconds) and the LED is off.
Receiving Volume Adjustment
The receiving volume can be adjusted during
a call. Use the volume control knob located
on the right side of the unit when it is being
worn. The volume setting on the cell phone or
other device will add or remove amplification
CLA7BT-EN,SP,FR.indd 11 9/9/08 10:45:01 AM