Clarion DB625MP - Manual (Page 10)

14
DB625MP
280-7815-00
Speaker Setting
Fine-tuning so that the BEQ LIGHT value is opti-
mal when setting the speaker type.
1. Enter Standby
Press the [FNC] button.
Select the “ALL OFF” display.
2. Enter Speaker Setting mode
Press the [BEQ LIGHT] button.
3. Select the Speaker type
Press the [ a] or [d] button.
Each time the button is pressed the setting
switches as shown below.
Speaker type Display
OFF “SP OFF”
For 5 & 4 in. speaker “SP 5/4”
For 6 & 6x9 in. speaker “SP 6 ∗9/6”
For the OEM speaker “SP OEM”
4. Exit Speaker Setting mode
Press the [BEQ LIGHT] button.
Switching Display
Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display
switches as shown below.
●
In Tuner source
Information Display
Frequency
Station name “SNPS”
Clock
●
In CD source
Information Display
Track number
Disc name “DNPS”
Disc title “D-TITLE”
Track title “T-TITLE”
Track number & Track Time
Clock
Basic Operations
● In MP3 source
Information Display
Track number
Disc name “DNPS”
Folder name “FOL NAME”
File name “FIL NAME”
Song title & Artist name “TITLE”
Album name & Artist name “ALBUM”
Track Time
Clock
Station/Disc Naming (SNPS/DNPS)
Attaching a title to a Station or CD.
1. Receive/play the station/disc you want to at-
tach a title to
2. Enter name set mode
Press the [DISP] button for at least 2 seconds.
“NAME SET” is displayed.
3. Move the cursor to the enter character posi-
tion
Press the [ a] or [d] button.
4. Select the character type
Press the [ ] button.
Each time the button is pressed the character
type switches as shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5. Select the characters
Press the [FM] or [AM] button.
6. Repeat steps 3 through 5 and enter the name.
7. Exit name set mode
Press the [DISP] button.
Notes:
• When operation stops for 10 seconds the name at
that time is registered, and Name Set mode closes.
• Memory numbers
- FM: 32 stations
- AM: 16 stations
- Internal CD player: 30 discs
• The title of station/CD can be changed by the same
operation used to name it.
• Disc Naming can’t be done during CD text or clock
display.
280-7815-00_009-030 (En) 4/2/02, 4:58 PM 14