Clarity Amplified Big Button Corded Phone with Digital Answering Machine E814 - Manual (Page 47)

47
using your CorDless hanDseT
(Purchased separately)
Call from the CID
1. In idle mode, press to access the CID. Alternatively, press
Call from the Redial List
1. In idle mode, press to access the redial list.
2. Press or to select the desired redial number.
3. Press or to dial out to the
selected number.
note:
Your handset automatically times the duration of every call. The call timer will
display a few seconds after the call has been made. It is shown in hours, minutes and
seconds format.
Temporary Tone Dialing
If you have pulse (rotary) dialing service only, you can temporarily switch from pulse to
touch-tone dialing during a call.
During a call, press <*>. Buttons pressed after this send touch-tone signals. The tele-
phone automatically returns to pulse dialing mode after you end the call.
answer a Call
1. When the phone rings, press to use the earpiece
–OR–
2. Press to use the speakerphone.
end a Call
1. During a call connection on handset, press to end the call.
–OR–
2. Put the handset on the base station to end the call.
Chain dialing
This feature allows you to initiate a dialing sequence from numbers stored in the
directory, CID or redial list while you are on a call.