Clarity Amplified Big Button Corded Phone with Digital Answering Machine E814 - Manual (Page 25)

25
using your e814
4. Press to confirm the setting; display shows Saved, you will hear a
beep; display goes back to the previous screen; press to return
to previous menu.
note: The respective ringer melody will be played during your selection.
set the Dial mode
You should normally leave the dialling mode at its default setting of TONE (also called
DTMF) unless the phone is connected to an old exchange that only recognizes
PULSE dialling.
In Idle:
1. Press and to select Settings.
2. Press and to select Dial mode.
3. Press and to select TONE or PULSE.
4. Press to confirm; display briefly shows “Saved”, then it returns to
previous menu
set the key Tone
The Key Tone is a confirmation beep when you press any key. It is set on by default, but
can be turned off, if desired.
In Idle:
1. Press and to select Settings.
2. Press and to select Key Tones.
3. Press and to select On or Off.
4. Press to confirm; display briefly shows “Saved”, then it returns to
previous menu.
set the home area Code
In Idle:
1. Press and to select Settings.
2. Press and to select Home area code.
3. Use numeric keypad to enter your local 3-digit area code.
4. Press to confirm; display briefly shows “Saved”, then it returns to
previous menu.