CMA Dishmachines CMA-180 - Manual (Page 16)

5. INITIAL PARTS KIT P/N 1100.17
P/N DESCRIPTION NO. REQ’D
00121.18 CMA-180 Drain Stopper O Ring 1
00200.10 Pump Assy 110/220V 60 Hz (Open) 1
00206.00 Pump Seal Kit 1
00302.19 CMA-180 Buna Gasket (#302.17) 1
00304.17 CMA-180 Wash Spray Arm 1
00304.19 CMA-180 Rinse Arm W/Bearing 1
00308.17 CMA-180 Rinse Arm SS End Plug 1
00308.50 Spray Arm End Plug SS 1
00363.00 Spray Base Lock Pin 1
00404.85 Contactor 208.240V 20AMP 1
00405.00 Start/Fill Switch Toggle 1
00411.00 Micro Switch 1
00475.00 Toggle Switch DPDT 15 AMP/Delimer 1
00501.17 Timer Motor Assy 60 Sec. 220V/60Hz 1
00562.00 Roller Door Switch 1
00602.00 Door Spring 1
00631.05 Ice Cube Relay 220V 1
00706.00 ¾ Water Solenoid Repair Kit JE 1
00735.00 ¾ Vac Breaker Rep Kit Watts 1
00738.15 ¾ Solenoid Coil JE 220V 1
03202.00 Thermometer CMA-180 “Wash” 1
03202.00 Thermometer CMA-180 “Rinse” 1
03408.55 Counter (Face Mount Sm) 220/50 1
13003.17 Contactor 60 AMP 3 Pole 1
13003.50 Contactor 30 AMP 1
13304.55 SS Final Rinse Spray Jet – HT 1
13415.00 EGO Thermostat Retrofit Kit Rinse 1
13417.47 CMA-180 Booster Heater Gasket 1
13417.65 Immersion Heater 5 Kw 3hp/1ph 1
13417.67 Immersion Heater 12 Kw 3PH/1PH 1
13417.85 Thermostat Heater CMA-44/CMA-180 Wash 1
13463.10 Liquid Level Switch SS – CMA-44 1
13605.00 Pressure Gauge 1
00421.90 CMA-180 Power Switch 1
00421.78 CMA-180 Illuminated Plug 1
17523.51 Hi Limit Switch 250 deg 1
NOTE: CMA recommend that this Model CMA-180 initial parts kit be
kept on hand, as a back up supply, in the event your machine should
require emergency service. All the parts included in this kit are
unique to the CMA-180 dishmachine, and are essential to the “quality”
operation and customer service to the CMA-180 unit.
MODEL CMA-180 INSTALLATION & OPERATION Rev. 2.03 Page 15