O.S. Engines FS-26S-CX - Manual (Page 13)

LONG SOCKET WRENCH
Recommended for easy removal
and replacement of the angled
and recessed glowplug, the
O.S.Long Socket Wrench
incorporates a special grip.
SILICONE FUEL LINE
Heatproof silicone tubing of
approx. 5mm o.d. and 2mm i.d.
is required for the connection
between the fuel tank and
engine.
ELECTRIC STARTER AND STARTER BATTERY
Use a 12-volt electric starter
with suitable battery for starting
the engine.(FS-26S-C)
FUEL PUMP
For filling the fuel tank, a simple,
polyethylene "squeeze" bottle,
with a suitable spout, is required.
The somewhat violent changes of vehicle
attitude that occur in off-road running,
combined with the fact that, in buggy type
cars, the fuel tank is often located some
distance from the carburettor, means that fuel
'head' at the carburettor can vary and upset
running.Therefore,it is recommended that a
muffler pressurized fuel feed system be used.
Never run your vehicle without the air cleaner.
Dust and dirt that may otherwise be drawn into
the engine will rapidly shorten its life.
PRESSURIZED FUEL SYSTEM
●
●
Fuel Tank
Silencer
Silicone tubing
Connect suitable length of
Silicone tubing between fuel
tank and silencer.
12