Basic engine parts, Installation of the engine, Installing the glowplug – O.S. Engines 91SX-H User Manual
Page 8

BASIC ENGINE PARTS
Heatsink Head
Carburettor
Typr 60L
Crankshaft
Propeller nut
Crankcase
Drive Hub
Glowplug
Beam Mount
INSTALLING THE GLOWPLUG
Install the washer on the
glowplug and screw
carefully into cylinder-
head, making sure that it
is not cross-threaded
before tightening firmly.
Glow plug
Washer
INSTALLATION OF THE ENGINE
The under-surfaces of all O.S. engine beam
mounting lugs are precision machined flat and
exactyly parallel to the engine's horizontal axis. It is
essential that the engine mounts in the model are
also accurately made and aligned. If they are not,
they will cause stress and distortion within the engine
itself, probably resulting in loss of performance and
internal damage.
The recommended screws for securing the engine to
the engine mounts in the model are 4mm or 4-40
steel Allen type. It is also advisable to use lock
washers or LOCTITE to prevent nuts from loosening.
Cover Plate
7
- 10LA (38 pages)
- 12CV (30 pages)
- 12CV-R (34 pages)
- 12LD (29 pages)
- 12TG (29 pages)
- 12TR (30 pages)
- 12TZ(P) (21 pages)
- 12XZ (20 pages)
- 12XZ Speed Spec II (20 pages)
- 12XZ Speed Spec III (4 pages)
- 15CV (30 pages)
- 15CV-A (34 pages)
- 15CV-M (4 pages)
- 15CV-R (34 pages)
- 15LA-S (32 pages)
- 18CV-R (17 pages)
- 18TM T-Maxx (44 pages)
- 18TZ-TX (56 pages)
- 21RG-X (P) (16 pages)
- 21RG-M (30 pages)
- 21RZ-R (26 pages)
- 21RZ-VO1B (28 pages)
- 21TM (21 pages)
- 21VG-P ES (25 pages)
- 21VZ-B (14 pages)
- 21VZ-B V-Spec (38 pages)
- 21VZ-M (20 pages)
- 21VZ-R (23 pages)
- 21VZ-R Turbo II (12 pages)
- 21XM (22 pages)
- 21XZ-B (21 pages)
- 21XZ-B VII (2 pages)
- 21XZ-R (20 pages)
- 21XZ-M (20 pages)
- 25AX (26 pages)
- 25XZ (21 pages)
- 28XZ (21 pages)
- 32SX-H (32 pages)
- 32SX-MX (22 pages)
- 37SZ-H (21 pages)
- 91FX (43 pages)
- 40LA (40 pages)
- 46AX (17 pages)
- 46FX-H Ring (30 pages)
- 46VX-M (4 pages)