NORAC UC4.5-BC - Manual (Page 8)

5
4 Cable Connection Guide
The following table shows the cables that are required for the main connections in the UC4.5
system. Refer to Figure 4 for the location of each cable by item number.
Item
Part
Number
Description
Available
Lengths
Typical
Length
Quantity
Needed
C05 43210-XX
Wing Sensor to 8-way Coupler:
UC5 Network Cable 18 AWG
10, 15, 20 m 20 m 2
C03 44656D
NORAC Valve Block to Valve Extension Cable:
NORAC Valve Cable
1
C10
44650-50
44650-51 Control Panel to Valve Extension Cable: Main
Power Cable
1
C11 44651-50
Main Power Cable to 8-Way Coupler and
Interface Cables:
Valve Extension Cable
1
C12 Various
Valve Extension Cable to Sprayer Valve Block:
Valve Interface Cable
1
C13 Various
Valve Extension Cable to Sprayer Valve Block:
Bypass/Remote Manual Interface Cable
(This cable is not always required)
Various 1.5 m 1
C16 Various
Valve Extension Cable to Sprayer Valve Block:
Roll Bias Interface Cable
(This cable is not always required)
Various 1.5 m 1
C17 Various
Valve Extension Cable to Sprayer Valve Block:
Valve Cable
(This cable is not always required) (Not Shown)
1
C18 Various
Valve Extension Cable to Sprayer Valve Block:
Miscellaneous Interface Cable
(This cable is not always required) (Not Shown)
1
C30 Various
Main Power Cable to Sprayer Power:
Battery Cable
Various 1.5 m 1
Table 1 and Table 2 describe possible connections between the interface cables and
connectors of the main power cable (C10) (Table 1) and the valve extension cable (C11)
(Table 2).