beautypg.com

3 installation, 1 self propel – NORAC 54VT-TJ-570 User Manual

Page 6

background image



4

3 Installation

The following instructions are for installation on a self propelled sprayer (Section 3.1) or pull
type sprayer (Section 3.2).

3.1 Self Propel

1. Securely mount the control module (E01) inside the sprayer cab.

2. Tee the CANbus interface cable (C40) in to the Tee Jet CANbus. Connect the 6 pin

Deutsch plug on cable C40 to the end of the control module with only one Deutsch
connector.

3. Connect cable C30 to the CANbus connector. Connect the other end of C30 to an

appropriate power supply.

4. Connect cable C01 to the other CANbus connector and route the cable towards the rear

of the sprayer.

Figure 1: Self Propelled Sprayer Installation

See also other documents in the category NORAC Gardening equipment: