NORAC 54VT-PRO-SP01 - Manual (Page 13)

11
Appendix A: Alternate Configuration
If your sprayer has European style slant control, you will need to reconfigure the switch box as
shown below. This is only required for sprayer types which are driving the slant output from
the Input Module. Reconfigure the pins on cable C26 as follows:
Connector Pin Location Connector Pin Location
Power White Grey End (C26) 1 Grey End (C26) 1
Ground Black Grey End (C26) 12 Grey End (C26) 12
Remote Auto Brown Grey End (C26) 11 Grey End (C26) 11
Remote Manual Blue Grey End (C26) 10 Grey Side (C20) 4
Main Up Purple Grey End (C26) 9 Grey End (C26) 9
Main Down Yellow Grey End (C26) 8 Grey End (C26) 8
Roll CW Red Grey Side (C20) 3 Grey End (C26) 6
Roll CCW Orange Grey Side (C20) 4 Grey End (C26) 10
European Style Slant Configuration
Wire Color
Function
(Cable C26)
Normal Configuration