NORAC 54VT-GS2-PT02 - Manual (Page 13)

11
Appendix A: Alternate Configuration
If your sprayer has European style slant control, you will need to reconfigure the switch box as
shown below. This is only required for sprayer types which are driving the slant output from
the Input Module. Reconfigure the pins on cable C26 and C20 as follows:
Connector Pin Location Connector Pin Location
Power White OEM 3 (C26) 1 OEM 3 (C26) 1
Ground Black OEM 3 (C26) 12 OEM 3 (C26) 12
Remote Auto Brown OEM 3 (C26) 11 OEM 3 (C26) 11
Remote Manual Blue OEM 3 (C26) 10 Thru 2 (C20) 4
Main Up Purple OEM 3 (C26) 9 OEM 3 (C26) 9
Main Down Yellow OEM 3 (C26) 8 OEM 3 (C26) 8
Roll CW Red Thru 2 (C20) 3 OEM 3 (C26) 6
Roll CCW Orange Thru 2 (C20) 4 OEM 3 (C26) 10
European Style Slant Configuration
Wire Color
Function
(Cable C26)
Normal Configuration