beautypg.com

11 software setup – NORAC UC5-BC-CS01 User Manual

Page 29

background image



26

11 Software Setup

1. Start up the sprayer and test the sprayer’s functionality. The display terminal does not need

to be powered on for the original boom function switches to operate. Unfold the booms
and raise/lower each boom and the main section.

Confirm that the cabling and hoses are agreeable to the entire range of motion.

2. If any functions do not work, review the hydraulic and electrical portions of this manual to

check for proper installation.

3. Turn on the power for the display terminal using the switch on the side.

4. The procedure for the installation of the UC5 Spray Height Control system is now

complete. Begin the AUTOMATIC SYSTEM SETUP procedure as described in the UC5

Spray Height Control Operator’s Manual.

See also other documents in the category NORAC Gardening equipment: