Cables to Go 1000TA/TPC - Manual (Page 10)

Asanté FriendlyNET™ GigaNIX™ 1000TA/TPC 10
recommended for extended use, as it violates the IEEE specification for 10 Mbit,
100 Mbit and 1000 Mbit Ethernet networks.
Pinouts for both the workstation and crossover cables are shown below.
Note: These pinouts are for cables used on 10 Mbit and 100 Mbit networks only.
Cables used for Gigabit networks must use all 8 wires.
Pin
Number Signal
1 Transmit+
2 Transmit-
3 Receive+
4 Unused
5 Unused
6 Receive-
7 Unused
8 Unused
Pinout for Workstation or "Straight Through" Cable
10 Mbit or 100 Mbit Networks Only