NORAC UC4+JD9-4B - Manual (Page 9)

6
Figure 3: Expansion Valve Final Assembly
10. Attach hose H03 to port B on the
expansion block. Route the free end of
the hose (H03) to the John Deere main
lift tee, which is located on the right
hand end of the John Deere valve block
(Figure 4).
Figure 4: Main Lift Tee Location
11. Disconnect the John Deere main lift tee
and insert the supplied 6FORXR
6MORT tee fitting (F03), shown in
Figure 4.
12. Attach the hose (H03) to the 6FORXR
6MORT tee fitting (F03).
You must ensure no hydraulic
components will interfere with
any sprayer parts or be pulled
tight at any time.
Figure 5: Main Lift Tee Fitting
Installed
Main Lift Tee
F03
H03