NORAC UC4.5-BC-HD3 Part 2 - Manual (Page 6)

3
4 Calibration
1. For optimal performance of the UC4.5 system, there should be very little play at the hitch
clevis. The addition of polymer washers can help tighten up this connection (Figure 2).
Figure 2: Hitch Point
2. Turn on the UC4.5 panel. If “HD3” shows up as the sprayer type, start the ReTune
process as per the UC4.5 Operator Manual (M01). This will tune the UC4.5 hydraulic
parameters to the tractor hydraulic system.
3. If no type is selected yet, start the Install as per the UC4.5 Operator Manual.