NORAC UC4.5-BC-GN2 Part 1 - Manual (Page 13)

10
4. Route the P12 and P6B of C10 out of the cab.
5. Connect the 12-pin and 6-pin Deutsch plugs (P12 and P6B) of the power cable (C10) to
R12 and R6 of C11 on the outside of the cab.
For a pull type sprayer, connect at the hitch. This connection will provide the
hitch disconnect.
6. Route C11 to the vicinity of the valve block at the rear of the sprayer.
Figure 9: Cable Connections
Figure 10: Cable Connection Schematic