Wired network setup – Nixeus Fusion XS User Manual

Page 11

Nixeus Technology, Inc

1. Turn on the unit. The LED on the front panel of the Fusion XS will turn orange during system boot up

and then green when it’s ready.

Note: The default display of the unit is Composite (CVBS). If you use HDMI, cycle through the TV output

modes to get the correct display mode.

Wired Network Setup

The default network type on the unit is wired network. Please connect the supplied Ethernet cable to your

router and the Ethernet port of the Fusion XS.

Under Setup, you can check the Network status.

Select “Type”  Network Type: Wired. Select “IP”  IP address