Nixeus Fusion HD Quick Start - Manual (Page 15)

Nixeus Technology, Inc.
15
TV Mode Setup
Please set the video source selector of your TV to match the connection to your unit. For
example, if you use HDMI, set the TV to use the correct HDMI input port.
1. Turn on the unit. The LED on the front panel of the PowerZest will turn orange during
system loading and then green when it’s ready.
START-UP PAGE
2. Check the TV display by going to ‘Setup’ → ‘System Setup’ → ‘TV Mode Setup‘ →
‘Video Output’.
The default display of the unit is Composite (CVBS). If you use HDMI, use the remote control to
press the “Output” button and you can cycle through the TV output modes to get the
correct display mode.