Cub Cadet 8454 - Manual (Page 54)

54
SECTION 6: SPECIFICATIONS
Model 8454
Maximum PTO Power 38.0 PS
Engine GROSS Power 45.0 HP
Engine Model 4A220
Type Indirect injection, water cooled, 4-cycle diesel
Number of cylinders 4
Bore and Stroke 3.425 x 3.638 Inches
(87 x 92.4 mm)
Total displacement 134.0 cu. in (2,197 cc)
Rated revolutions 2600 RPM
Injection timing 18° before T.D.C.
Injection order 1-3-4-2
Compression ratio 22:1
Lubrication system Forced Lubrication
Cooling system Pressurized radiator, forced circulation with water pump
Alternator 12V, 50 amps
Weight (Dry) 456 Lbs. (207 kg)
Capacities Fuel tank 11.5 Gal. (43.7 L.)
Engine crankcase 1.9 Gal. (7.0 L.)
Engine coolant 2.4 Gal. (8.9 L.)
Transmission case 9.0 Gal. (34 L.)
Front axle case 2.2 Gal. (8.2 L.)
Dimensions
(with std.
tires) Overall length (without 3 pt.) 120.9 in.
Overall length (with 3 pt.) 130.8 in.
Overall width (max. w/ Ag tires) 61.0 in.
Overall height (Top of ROPS) 94.3 in.
Overall height
(Top of steering wheel) 63.3 in.
Wheelbase 71.6 in.
Ground Clearance 14.5 in.
Tread width
with std. tires Front 49.8 in.
Rear 46.4 - 58.6 in.
Traveling
system Clutch Dry single stage
Steering Hydrostatic steering system
Transmission Synchronized shuttle and transmission
12 forward and 12 reverse speeds
Brake Traveling Wet disc type
Parking Connected to traveling brake
Differential Bevel gear
Hydraulic
system Hydraulic lift control system Position, Draft, and Mixed control
Pump capacity Main pump 8.2 gal./min. (31.2 L/min.)
Power strng. 5.0 gal./min. (18.7 L/min.)
Three point hitch SAE Category 1
Maximum lifting capacity
(at hitch lift point) 2314 lbs. (1041 kg)