MyGica ATV380 - Manual (Page 3)

2
Remote Controller
Learning Key function setup instruction:
1. Press and hold the Power button inside the learning area (Button 13) for 6 seconds, the red indic
ator will change from flashing to solid light.
2. Press any button inside the learning area, the red indicator will change from solid to slow
flashing.
3. Hold the remote control you want to learn from (for example TV controller), point to the media bo
x, within 3-5mm and press the button you want to learn; The red indicator should
quickly flash for 3 times then becomes solid light, this means the learning is successful. (If
there is no operation, the red indicator will slow flash for 10 secs they turns off and exit
learning states)
4. To learn other buttons (within the learning area), just repeat step 2~3.
5. Once learning is finished, press any button outside of learning area to exit learning states
and the red indicator will turn off.