MUTEC MC-5 - Manual (Page 13)

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 88
\
B E D I E N E L E M E N T E B E D I E N E L E M E N T E B E D I E N E L E M E N T E
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
13
GENERAL OPERATION
Selecting Function Menus and setting Functions
Operating the MC-5 is very simple! The device is fully operated using the 2
keys at the front panel.
1 Switching the MENU key toggles between different basic function menus.
2 Switching the SELECT key activtes individual functions within one
function menu.
Steps of Operation
1 First press on MENU or SELECT key enables the last selected function
within the last selected function menu. The corresponding LED is
beginning to flash.
2 Every press on SELECT key will select a new function. The LED of every
selected function will flash accordingly and the corresponding function is
available at once.
3 When the needed function is selected, do not press the switches again!
After a period of approx. 4 seconds the LED in front of the selected
function will stop flashing.
All user-specific function settings
are available furthermore when
power is restored.
!
Functions
Menus
2. SELECT
selects individual
functions within
one function
area.
1. MENU
selects individual
function menus.
MENU + SELECT operation
Menus
Functions