Pro series wah model pwa – Morley PRO SERIES WAH (PWA) User Manual
Page 2
FEATURES
•
WAH Level Control: This knob controls the
overall output level of the WAH effect. It does
not change the wah sweep or range.
•
WAH On/Off Switch: This switch turns the
WAH effect “on” or “off”.
•
Electro-Optical: The amount of light from the
LED (Light Emitting Diode) that shines on the
LDR (Light Dependent Resistor) is controlled
by a shutter placed between the two devices.
Our unique electro-optical design ensures
smooth overall control of the WAH without
unwanted noise typical with potentiometer (pot)
controlled pedals.
•
LED WAH On/Off Indicator: A red LED
located above the WAH switch serves as on
on/off indicator. When the LED is on, WAH is
engaged. When the LED is off, the pedal is in
bypass mode.
185 Detroit Street, Cary, IL 60013
Phone: (847) 639-4646
Fax: (847) 639-4723
www.morleypedals.com
Pro Series WAH
Model PWA
OWNER’S MANUAL