Milwaukee Tool 5615-24 Wiring - Manual

WIRING INSTRUCTIONS
TITLE
DATE MILWAUKEE ELECTRIC TOOL CORP. 13135 WEST LISBON RD. BROOKFIELD, WIS.
BODY GRIP ROUTER
58-01-0705
BULLETIN
Oct. 2003
NOTE:
All lead lengths are before stripping.
All leads must be held to ± .125"
unless specified elsewhere.
Strip wire per ES 13-11.
Crimp terminals per ES 13-15.
Drwg. 2
TERMINAL DESCRIPTION
Qty. Code Part No.
T1 23-74-0065 1
T2 23-74-1060 1
T3 23-74-0605 1
Wire Wire Origin or
No. Color Part No. Gauge Length Terminals, Connectors and End Wire Preparation
1 Black Cord 16 4-3/4" Component of cord assembly. Strip 3/16" for T1.
2 White Cord 16 4-3/4" Component of cord assembly. Strip 3/16" for T3.
3 Black Switch 18 2-1/2" Component of switch assembly. Strip 3/16" for T2.
BULK LEAD WIRE - BULLETIN 58-01-0003
WIRING SPECIFICATIONS
Remove slack from cord wires #1
and #2 between wire traps. Wires
are not to extend into frame
opening.
Black cord wire #1 is
connected to the switch.
White cord wire #2 is
connected to the field
terminal as shown.
Route black switch lead #3
to brush holder, as shown.
Black switch lead #3 must
be placed in wire trap prior
to white cord lead #2.
Order of cord wire placement
in traps are interchangeable.
Route brush shunt wires
(2 places) to brush holder,
as shown.
Cord jacket to extend past
cord clamp approx. 1/4".
Top View
WIRING SCHEMATIC
Connector Terminal (Jumper)
No. 23-74-0055
Black Black
White
FIELD
CORD ARM
SEE REVERSE SIDE FOR MODELS
WHERE WIRE #3 IS A SEPARATE
LEADWIRE ASSEMBLY AND IS NOT
SOLDERED TO THE SWITCH.