Milwaukee Tool 2592-20 User Manual

Page 2

IMPORTANT SAFETY INSTRUCTIONS

WARNING READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS.

Failure to heed all warnings listed below, may result in electric shock, fi re and/or serious

personal injury.

KEEP THESE INSTRUCTIONS.

SPECIFIC SAFETY RULES

• Read these instructions.

• Keeps these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water. Never im-

merse the apparatus in liquid or allow a liquid to fl ow

inside the apparatus. Water entering an apparatus

will increase the risk for electric shock.

• Clean only with dry cloth. Certain cleaning agents

and solvents are harmful to plastics and other insulat-

ed parts. Some of these include: gasoline, turpentine,

lacquer thinner, paint thinner, chlorinated cleaning sol-

vents, ammonia and household detergents containing

ammonia. Clean dust and debris from vents. Keep the

apparatus handle clean, dry and free of oil or grease.

• Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

• Do not use near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

amplifi ers) that produce heat.

• Use only attachments/accessories specifi ed by

the manufacturer.

• Only operate this apparatus in a well ventilated area.

• Refer all servicing to qualifi ed service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture or does not oper-

ate normally. Service or maintenance performed by

unqualifi ed personnel could result in a risk of injury.

• A battery operated apparatus with integral batter-

ies or a separate battery pack must be recharged

only with the specifi ed charger for the battery. A

charger that may be suitable for one type of battery

may create a risk of fi re when used with another battery.

• Use battery operated apparatus only with specifi -

cally designated battery packs. Use of any other

batteries may create a risk of fi re.

• When battery pack is not in use, keep it away

from other metal objects like: paper clips, coins,

keys, nails, screws, or other small metal objects

that can make a connection from one terminal to

another. Shorting the battery terminals together may

cause sparks, burns, or a fi re.

• Avoid body contact with grounded surfaces such

as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your

body is grounded.

• Never disassemble the apparatus or try to do any

rewiring on the apparatus's electrical system.

• Do not expose this apparatus to dripping and splash-

ing, or place objects fi lled with liquids on this unit.

• Maintain labels and nameplates. These carry im-

portant information. If unreadable or missing, contact

a MILWAUKEE service facility for a free replacement.

• This apparatus is designed to be powered by a

12 volt MILWAUKEE Li-ion battery pack. Do not

attempt to use with any other voltage or power supply.

Federal Communications Commission

FUNCTIONAL DESCRIPTION

Volts

Direct Current

To reduce the risk of injury, user

must read operator’s manual.
Federal Communications

Commission

Cat.

No.

Input

Volts

USB Output

Volts

USB Output

Amps

2592-20

12 DC

5 DC

2.1

SYMBOLOGY

SPECIFICATIONS

ASSEMBLY

WARNING

Recharge only with the

charger specifi ed for the battery. For specifi c

charging instructions, read the operator’s

manual supplied with your charger and battery.

Inserting/Removing the Battery

To remove the battery, push in the release buttons

and pull the battery pack away from the speaker.

To insert the battery, slide the pack into the body of

the speaker. Make sure it latches securely into place.
Fuel Gauge

The Fuel Gauge will show the remaining battery

charge for 2-3 seconds after turning on the speaker.

To signal the end of charge, 1 light on the fuel gauge will

blink slowly until the speaker shuts off automatically.
Battery Pack Protection

To protect the life of the battery pack, the speaker will

shut off when the battery’s charge becomes too low.

If this happens, remove the battery pack and charge

it according to the charger’s instructions.
Connecting an Auxiliary Device

Connect an MP3 player, CD player, or other audio

device directly to the speaker using the stereo aux-

iliary jack AUX IN.
USB Power Outlet

This outlet can be used to charge a cell phone, power

an MP3 player or any other device that uses less than

2.1A of DC electrical current.

NOTE: Any device that uses more than 2.1 A of DC

electrical current will trip a self-resetting overload and

disable the output.

OPERATION

WARNING

To reduce the risk of fi re or

electric shock, do not expose this speaker to

rain or moisture.

Turning On/Off and Connecting to Bluetooth

Press the Power/Bluetooth

button to turn the

speaker on and off.

MAINTENANCE

WARNING

To reduce the risk of injury,

always unplug the charger and remove the

battery pack from the charger or tool before

performing any maintenance. Never disas-

semble the tool, battery pack or charger.

Contact a MILWAUKEE service facility for

ALL repairs.

Maintaining Tool

Keep your tool, battery pack and charger in good

repair by adopting a regular maintenance program.

If the tool does not start or operate at full power

with a fully charged battery pack, clean the contacts

on the battery pack. If the tool still does not work

properly, return the tool, charger and battery pack,

to a MILWAUKEE service facility for repairs.

WARNING: Changes or modifications to

this unit not expressly approved by the party

responsible for compliance could void the user’s

authority to operate the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

NOTE: This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the in-

terference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

1. Volume down
2. Power/Pair
3. Stereo AUX jack
4. USB power outlet
5. Fuel gauge
6. Volume up
7. Indicator light

8. Hang hook
9. Battery bay
10. Bass port

WARNING

To reduce the risk of per-

sonal injury and damage, never immerse your

tool, battery pack or charger in liquid or allow

a liquid to fl ow inside them.

Cleaning

Clean dust and debris from charger and tool

vents. Keep tool handles clean, dry and free of oil

or grease. Use only mild soap and a damp cloth

to clean the tool, battery pack and charger since

certain cleaning agents and solvents are harmful

to plastics and other insulated parts. Some of these

include gasoline, turpentine, lacquer thinner, paint

thinner, chlorinated cleaning solvents, ammonia and

household detergents containing ammonia. Never

use fl ammable or combustible solvents around tools.
Repairs

For repairs, return the tool, battery pack and char-

ger to the nearest service center listed on the back

cover of this operator's manual.

• If no Bluetooth device was previously paired,

Bluetooth pairing will begin automatically and the

indicator light will fl ash continuously.

• The speaker will continue to search for a signal for

10 minutes.

• To manually pair a device, turn on the speaker and

select "M12 Speaker" on the Bluetooth capable

device.

• Once paired, the speaker will automatically re-

connect to the same device when the speaker is

turned on.

• To pair the speaker to a different device, press

and hold the power/pair button for 3 seconds un-

til the indicator light fl ashes. It will then be in pair

mode and can be connected to a different device.

• Once the device has successfully paired with the

speaker, use the device controls to move through

tracks and control volume.

Volume

Use the

to increase or decrease the volume.

NOTE: To control the volume using the device's

controls, fi rst turn the speaker volume to max (a

beep will sound).