Milwaukee Tool 9672-20 - Manual (Page 3)

page 3
Each MILWAUKEE hand operated chain hoist is built in accordance with the specifications contained herein and at the time of manufacturer complies
with our interpretation of applicable sections of the American Society of Mechanical Engineers (ASME) Code B30.16 "Overhead Hoists" and the
Occupation Safety and Health Act (OSHA). Copies of this standard can be obtained from ASME Order Department, 22 Law Drive, Box 2900, Fairfield,
NJ 07007-2900, USA.
The safety laws for elevators and for dumbwaiters may specify construction details that are not necessarily incorporated in this hoist. We
recommend the use of equipment that meets state and national safety codes. Milwaukee Electric Tool Corporation cannot be responsible for
applications other than those for which
MILWAUKEE equipment is recommended.
1. Read ASME B30.16 safety standard for Overhead Hoists and this manual thoroughly.
2. Do not permit more than one operator to pull on a single hand chain at one time.
SPECIFIC SAFETY RULES — CHAIN HOISTS
Catalog
No.
9667-20
9668-20
9669-20
9670-20
9671-20
9672-20
9673-20
9674-20
9675-20
9676-20
9677-20
9678-20
9679-20
9680-20
9681-20
Lift
Ft (M)
8 (2.4)
15 (4.6)
20 (6.1)
8 (2.4)
15 (4.6)
20 (6.1)
25 (7.6)
8 (2.4)
15 (4.6)
20 (6.1)
8 (2.4)
15 (4.6)
20 (6.1)
8 (2.4)
20 (6.1)
Tonage (Kg)
1/2 (500)
1/2 (500)
1/2 (500)
1 (1000)
1 (1000)
1 (1000)
1 (1000)
2 (2000)
2 (2000)
2 (2000)
3 (3000)
3 (3000)
3 (3000)
5 (5000)
5 (5000)
Specifications
1. Upper hook
2. Hoist frame
3. Load chain
4. Loose end pin
5. Loose end of chain
6. Hand chain
7. Hook latch
8. Hook tip
9. Lower hook
FUNCTIONAL DESCRIPTION
To reduce the risk of injury, do not alter or modify
the hoist and only use
MILWAUKEE replacement
parts. Alterations or modification of hoist and use
of non-
MILWAUKEE parts can lead to dangerous
operation and injury.
WARNING!
41. Chain should be lubricated as recommended in this
operator's manual.
42. Carefully test hoist after repairs before returning it to full
service (See "Testing" under the "Maintenance" section).
43. Do not attempt to lengthen the load chain or repair damaged
load chain.
44. Do not adjust or repair a hoist unless qualified to perform
hoist maintenance.
45. Use MILWAUKEE replacement parts when repairing a hoist.
7
6
4
5
1
2
3
8
9
7