Longshine LCS-WA5-45 - Manual (Page 16)

12
System Log
This System Log page shows the information of the current activities on the AP.
To enable system log function:
1. Mark the “Enable Log” checkbox.
2. To see all information of the system, select the “system all”
checkbox.
To see wireless information only, select the “wireless” checkbox.
To send the log information to a certain note, select the “Enable
Remote Log” checkbox and fill in the IP address in the “Log Server
IP Address” box.
3. Click the “Apply Changes” button to activate
You could also click the “Refresh” button to refresh the log information or click
the “clear” button to clean the log table.