Longshine LCS-K602-A - Manual (Page 7)

6
Plug the USB keyboard, USB mouse, and monitor into the corresponding
connectors of your 2-port USB Cable KVM Switch.
Plug the speakers into the corresponding jacks of your 2-port USB Cable KVM
Switch.
Connect the KVM cables into the corresponding ports on the computers.
3.3 Notice for Sun Micro System user
Since some Sun Micro system will detect the monitor information, if system fail to
get information from the Monitor, then you won’t get any screen came out. So for
safety, “YOU MUST SWITCH USB KVM SWITCH TO THE SUN MICRO
SYSTEM” before you power on the Sun Micro System. After you seeing the
screen from the Sun Micro System, then you can switch to any other Host. If you
have multiple Sun Micro systems, then you have to repeat this procedure one by
one.
3.4 Hot Swappable
The 2-port USB Cable KVM Switch supports hot-swap technology. All the
components can be added or removed at any time without shutting the PC down.
3.5 Driver Installation (Windows 98/SE only)
After you connect the 2-port USB Cable KVM Switch to your PC, Win 98 will
automatically detect the device and prompt for the driver installation. Please
install the 2-port USB Cable KVM Switch by the following instruction from Step
A-E. Please have your Windows 98 CD ready.
Fig. A
A. Press “Next” to Continue.
(Ref. Fig. A)