Longshine LCS-844MT - Manual (Page 23)

19
5
Configuration
There are two separate methods for configuring this
Device Server for use. In the first section of this
chapter, the Command line Interface (CLI) or Menu-
driven interface via the Console Port to set the device
IP and TCP configuration to monitor/managed the
attached serial device via Serial IP Redirector
software. The second section will describe CLI or
Menu-driven via Telnet configuration. Firstly, make the
connection below:
DIP Switch 1 set to ‘ON’ position
Console Port Access
The Device Server is accessible via a terminal
emulator attached to the RS-232 console port. Please
follow the step below.
1. Attaching the serial cable to COM port of
computer and serial port of device server.
2. Select Hyper Terminal from (start menu
Æprograms Æ Accessories Æ communication) a
Device
Server
Female Female
Computer
RS-232 Cable