Liberty Garden 698 - Manual (Page 4)

3
4. Turn the cart upright. Place the U-Handle (B)
over the ends of the legs (G) and use the hex bolts
(L) and wing nuts to secure the U-Handle. Attach
the basket (C) using the hex bolts and fasten them
with hex and wing nuts (L). See Figure 4
4
Note: If you have trouble with the swivel turning and kinking the leader hose, try spraying a
silicone spray inside to lubricate the O-rings. The O-rings located inside the swivel may be dry.
You can reach the O-rings by taking off the retaining clip or spraying inside the opening of the
swivel.
8. Attach your garden hose to the hose connection and wind
around the hose reel spool (A). See Figure 7
FIGURE 6
FIGURE 7
• DO NOT leave water running through the hose reel
unsupervised.
• DO NOT expose the reel to freezing temperatures with water
remaining in the unit.
• Turn the water off after each use.
FIGURE 5
H
A
D
6. Attach the leader hose (D) to the swivel connector.
See Figure 6
5. Remove the top flange nut on the grip handle (H).
Attach the handle and lower nut to the steel crank.
Using adjustable wrench or your hand, tighten nuts on
the front and back of the steel crank. - The two nuts
may be adjusted to allow the handle to rotate freely.
Figure 5
A
FIGURE 4
CART ASSEMBLY
C
G
B
B
L
L