Liberty Garden 710 - Manual (Page 6)

6
OPERATING INSTRUCTIONS
1
FIGURE 1
FIGURE 2
FIGURE 3
FIGURE 4
Pull up on handle knob located on the base shelf (C) then
rotate hose reel (D) to one of the four locking positions.
3
Release the handle on the base shelf (C) and lock unit into
one of the desired positions. Your Navigator rotating hose
reel is now ready for use.
4
Located at the bottom of the base spool (D) near the crank
handle is a pre-assembled Allen screw. Using the supplied
Allen wrench (AA) tighted or loosen tension on the spool.
To increase the tension, tighten the screw, to reduce
tension, loosen the screw.
2
Pull up on the handle knob located on the base
shelf (C) and turn the locking pin to the up position.
The Navigator rotating hose reel will now turn a full
360 degrees.
D
TIP: Keep reel in the locked position when winding garden hose.
C
C
D
D
AA
C