Crestron electronic CLS-C6 - Manual (Page 8)

7
Intuitive Design Software
The Load Schedule View allows you
to add up to six lighting loads and set load
properties such as fade time, fixture quantity,
and fixture watts.
The Shades View allows you to add up
to 16 shade controllers and configure up to
6 shade groups.
The Scenes View allows you to define up to
15 discrete scenes, as well as the ON scene
and OFF scene.
The iLux View allows you to assign functions
to all the front panel buttons.
The Keypads View allows you to add up
to 16 keypads to the local iLux network, and
assign functions to the keypad buttons.
The Finish View allows you to send the
project to the iLux, set Network IDs, retrieve
local settings from the iLux, and print reports.
The iLux Designer features an easy-to-use
interface arranged into six views:
1
Crestron RoomView ® is an intuitive web-based
graphical user interface that allows remote
monitoring and control of all connected lighting
loads throughout your facility. This can include a
network of buildings located together or spread around
the world. RoomView ® also allows remote monitoring
and control of other
connected systems
such as audio visual,
security, and HVAC. With a user-friendly graphical
interface that can be accessed from any PC or
touchpanel on the network, RoomView ® offers additional
capabilities and benefits such as event scheduling,
reporting and logging of data. With RoomView ® you
can get every room connected throughout your facility
for the ultimate in system management and control.
RoomView ® offers extensively customizable control
and monitoring for centralized facility management
Centralized Facility Management
While iLux can be setup easily from its front panel without requiring a PC,
iLux Designer software provides for enhanced programming
of the front panel and keypad button functions, including scene
recalls, scene toggles, fade times, ramp rate, master dimming control,
master shade control, and scene programming based on occupancy
status. iLux Designer also provides an interface to Crestron Engraver
software for simplified creation of custom engraving orders.