Levana Astra PTZ - Manual (Page 12)

Turn the MOnITOR On/OFF
• Press and hold the POWER
button on the side of the monitor to turn the monitor ON.
• Press and hold the POWER button again to turn OFF the monitor.
Pairing the Camera(s) and Monitor
The camera and monitor come paired (connected) to each other automatically. However, if upon opening this package the
devices do not automatically connect and transmit, you may do so manually. To pair additional cameras, repeat steps 1 to 3
and be sure to assign a different camera number to each additional camera.
1. To pair your camera and monitor, press the MENU button. Using
the navigational arrows on the front of the monitor, highlight the
PAIRING icon and press the SELECT + button once to select.
2. Use the navigational arrows to highlight the the icon.
3. Press the SELECT + button. When you see flashing next to camera
icon, quickly press and hold the PAIRING button on the BOTTOM
of the camera. A checkmark will appear next to camera confirming
pairing is successful. Video/audio will be transmitted automatically.
OPeRATIOn
12
note: Before you begin pairing, be sure to have the monitor and the camera(s) side by side.
note: Repeat steps above when pairing additional cameras.
1
2
CAMERA
BOTTOM