Leapers PRO AR Pistol 4 Free Float Quad Rail System (MTU008) - Manual (Page 5)

7 8
Prepare the rifle, the mount and necessary
tools (a hummer, a punch, an AR15 upper
receiver vise block, an AR15 handguard
removal tool, an AR15 combo wrench
and a vise). Set up a comfortable working
environment.
1
Remove the original plastic handguard with a
handguard removal tool.
Remove the lower receiver with stock
assembly. Take out the bolt assembly.
3
Remove the Flash Hider by turning it
counterclockwise with an AR15 combo
wrench.
2 4
Caution: Make sure firearm is not loaded.
Remove magazine and examine chamber.
Use safe handling procedures at all times.
MODEL 4/15 FREE FLOATING QUAD RAILS
INSTALLATION GUIDE