LABEC M-SCEN-207 - Manual (Page 8)

4. Operation Procedure:
(1) Turn the speed to be “0” then plug in the centrifuge.
(2) Press【Manual Safe Button】and cover can be opened.
(3) Place sample into carrier.
(4) Close cover.
(5) Adjust timer to the desired time.
(6) Turn the speed to the required rpm, rotor begins to rotate and goes up to desired speed.
(7) Time is up, then press【Manual Safe Button】to open the cover and power cut off at the
same time.
Caution:
1. Please don’t open cover during rotation.
2. During rotation, please don’t exceed the max. speed of the centrifuge (refer to page 3) and
don’t place substandard rotor.
3. The centrifuge is without anti-explosion, so please don’t explosive material.
6