LABEC Z-L-450 - Manual (Page 3)

Introduction
Using Environment of Equipment
In order to ensure the safety of using the machines,
the centrifuge may be damaged by following factors:
－ Chemical effects;
－ Environmental impacts, including radiation of natural UV;
－ The corrosion and abrasion and wear of shield and other security components.
* Indoor use;
* Altitude: ≤2000m;
* The applicable temperature range for the instrument is: +5º ~ +40º;
* Relative humidity is ≤80%;
* The scope of power supply for the instrument is AC240V, 50HZ/60
（marked behind machine);
* Adequate ventilation should be available indoor;
* There isn't any vibration or airflow around which maybe
effect the performance of the instrument;
* There isn't any conductive explosive dust or corrosive dust around;
Safety Tips
* Please read this manual carefully for the first-time using!
* The maintenance of the instrument can only be done by Our Company or authorized dealers
of Our Company;
* Please NEVER use the following materials in the centrifuges:
－
Inflammable and explosive materials;
－ Strengthen chemical materials;
－ Toxic or radioactive substances or pathogenic micro-organisms and so on.
* If there is any situation that not mentioned in this manual, please kindly contact Our Company
or authorized dealers to ask for best way of dealing with it.
* Please try to use the accessories from Our Company, and if you need use the ones from
others, Our Company will not be responsible for any adverse effects caused by it.
* You must do the inspection and maintenance for the Low-speed table-top centrifuge at the
stated interval.
Security warning signs
Note: Before using this instrument, please read this manual carefully.
Note: The high pressure is dangerous!