Kuzma Stabi User Manual
Page 26
_________________________________________________________________
S T A B I T U R N T A B L E
26
KUZMA
E. Slow Start
Full speed of platter rotation should be achieved in approximately 4 - 6 seconds. If
this takes longer first check that belt and pulley are clean and that there is adequate oil
in the bearing. If the problem persists it will be necessary to increase the distance
between subplatter and motor pulley in order to increase the tension of the belt. For
this it is necessary to remove the subchassis to gain access to the motor.
We would advise you to consult your dealer for this or follow the procedure outlined
below: (Fig. 20)