Kuzma STOGI S 12 120716 - Manual (Page 8)

8
Counting rotations enables you to listen to improvements in focus and to return to the original
position. If necessary consult your dealer.
Cueing device:
The height of the cueing device can be adjusted with Allen key (1.5 mm).
Tube rest:
The height of the tube rest can be adjusted with Allen key (1.5 mm).
4. Maintenance:
Bearing:
The bearing does not require any maintenance.
Cueing device:
Occasionally clean the black foam tube support to increase grip, using soft cloth soaked in
alcohol.
5. Problems:
Silicone oil spill:
If oil is spilled, firmly wipe with cloth or paper towel. Afterwards clean with a soft cloth
soaked in alcohol.
Tube running outwards:
Due to the silicone damping and descent rate of the tonearm, lower friction on the cueing
device in the 'play' position may cause the tube to travel towards the outer edge of the record.
Check that surfaces on the cueing device are clean and, with fingers, bend down the part of
the cueing device which lifts the tube at the inner groove. Check that bias is not too strong.
Also check that the wire loop is in a normal arc .
Mistracking:
Inadequate tracking force.
The cartridge may be too light. If so check the choice of counterweight and use only one
instead of two, or consult your dealer.
Cueing device too high in 'play' position and is touching the tube. See the air gap and lower
the cueing device.