KERO Neris ALU 3 - Manual (Page 5)

4
Step 2.
Position gunwales (female) of Bow Assembly
next to cross rib bracket rings. Insert 6 long
gunwales one by one into Bow Assembly
through the bracket rings until complete
stop.
Repeat this step for attaching
remaining 6 long gunwales to Stern Assembly.
The bow and stern sections are ready to be
inserted in to a skin.
Step 3.
Unroll the skin. Insert bow and stern
assembly sections in to the skin (NERIS
logo is marked on stern of the skin).
Make sure that the stitch line
between deck and hull is
positioned just above the upper
gunwale. Avoid possible tilt of bow
and stern sections while putting them
inside the skin.
3. Assembly Instructions