KERO Neris 2 - Manual (Page 4)

3. Assembly Instructions
All NERIS folding kayaks are run through
presale test assembly.
However, the
first kayak assembly may seem to be
more challenging then following one.
The skin is being stretched with each
assembly and it will be easier to put the
skin on a frame.
Two people kayak assembly is
recommended. The kayak is to be
assembled on even and clean surface.
Avoid assembling the kayak on sand. It
may cause damage to joining parts and
m o r e
d i f f i c u l t a s s e m b l y a n d
disassembly in future.
The main parts of the kayak are marked
with numbers and pointing arrows for
ease of assembly.
– Stern, Left
Bow, Right
Stern, Right
Marking points:
Bow, Left LB –
–
–
LS
RB
RS
Step 1.
Attach Cross ib #1 to Bow Assembly as marked with
two arrows pointing each other. Use a wing nut and
bolt to secure the crossrib.
Repeat this step for stern assembly using Cros ib #7.
The Assembly upper and middle s are
connected by plates with keyhole slots to be secured
on sides of Cross ibs #1 and #7.
r
sr
stringer
r
3